|
ACCESSORIES
CONNECTORS
 Coaxial Connectors - BNC Crimp Plugs
The Xnet BNC Connectors are available to suit a wide range of coaxial cables. |
| Part No. |
Description |
| B37A41HB25X99 |
BNC Crimp Plug to Suit RG59/RG62/URM70 |
| B35A41JB10X99 |
BNC Crimp Plug to Suit RG58/URM43 |
| 13066-RG6 |
BNC Crimp Plug RG6 |
| 13066-TV125 |
TV125 |
| 303-3002 |
BNC Crimp Plug to Suit 3002 |
|
 Coaxial Connectors - BNC Jacks |
| Part No. |
Description |
| B35E43JB10X99 |
BNC Crimp Jack to Suit RG58/URM43 |
| B37E43HB25X99 |
BNC Crimp Jack to Suit RG59/RG62/URM70 |
| B35H45JB10X99 |
BNC Crimp Bulkhead Jack to Suit RG58/URM43 |
| B37H45HB25X99 |
BNC Crimp Bulkhead Jack to Suit RG59/RG62/URM70 |
|
 BNC Terminators |
| Part No. |
Description |
| B35Z98H501X99 |
BNC Male Terminator to Suit RG58 |
| B35Z98H751X99 |
BNC Male Terminator to Suit RG62 |
| B35Z98H911X99 |
BNC Male Terminator to Suit RG59 |
|
 BNC Couplers |
| Part No. |
Description |
| B35P34H999X99 |
BNC Adaptor Jack - Jack |
|
 Coaxial Connectors - BNC Adaptors |
| Part No. |
Description |
| 731-00-0082 |
BNC T Adaptor Plug -Jack - Jack |
|
 Strain Relief Boots |
| Part No. |
Description |
| RG58BK |
Straw Relief Boot RG58 |
| RG59/62BK |
Straw Relief Boot RG59, RG62 |
|
 ‘D’ Type Connectors
A range of high performance “D” connectors. Available in both solder and crimp versions with high grade plastic covers.
Solder Type
|
| Part No. |
Description |
| EDP09Z |
9 Pin Plug |
| EDS09Z |
9 Pin Socket |
| EDP15Z |
15 Pin Plug |
| EDS15Z |
15 Pin Socket |
| EDP25Z |
25 Pin Plug |
| EDS25Z |
25 Pin Socket |
|
 Crimp Type |
| Part No. |
Description |
| CDP09 |
9 Pin Plug |
| CDS09 |
9 Pin Socket |
| CDP15 |
15 Pin Plug |
| CDS15 |
15 Pin Socket |
| CDP25 |
25 Pin Plug |
| CDS25 |
25 Pin Socket |
|
 Covers |
| Part No. |
Description |
| ET09 |
9 Way Plastic |
| CM09 |
9 Way Metal |
| ET15 |
15 Way Plastic |
| CM15 |
15 Way Metal |
| ET25 |
25 Way Plastic |
| CM25 |
25 Way Metal |
|
| Crimp Contacts |
| Part No. |
Description |
| CP100 |
Pack of 100 plug contacts |
| CS100 |
Pack of 100 socket contacts |
|
| Jack Posts |
| Part No. |
Description |
| TB8 |
1 pair female jack posts |
|
 Computer Interface Cables
A range of printer cables, VGA leads for use with high resolution monitored and keyboard and mouse cables.
| Part No. |
Description |
| EXTPS2K2 |
2mtr. PS2 M/M Keyboard/Mouse Cable |
| EXTPS2K3 |
3mtr. PS2 M/M Keyboard/Mouse Cable |
| EXTPS2M/FK2 |
2mtr. PS2 M/F Keyboard/Mouse Cable |
| EXTPS2M/FK3 |
3mtr. PS2 M/F Keyboard/Mouse Cable |
| EXTVGAM/FK10 |
10mtr. VGA M/F Monitor Cable |
| EXTVGAM/FK2 |
1.8mtr. VGA M/F Monitor Cable |
| EXTVGAM/FK3 |
3mtr. VGA M/F Monitor Cable |
| EXTVGAM/MK2 |
1.8mtr. VGA M/M Monitor Cable |
| EXTVGAM/MK3 |
3mtr. VGA M/M Monitor Cable |
| IBM18C |
1.8mtr. Parallel Printer Cable |
| IBM18C3 |
3mtr. Parallel Printer Cable |
| IBM18C5 |
5mtr. Parallel Printer Cable |
| IBM18C7 |
7mtr. Parallel Printer Cable |
| IBM18C9 |
9mtr. Parallel Printer Cable |
|
Custom Cable Assembly Service
Temple provide a quick and efficient source for a wide range of pre terminated copper and fibre cables. Cables will be individually made up to your requirements and carefully checked and tested to ensure performance and reliability. To order please provide details of the cable and connectors required, together with a wiring configuration and required length.
Quick turnaround
Individually made and tested
Competitive prices
Copper or fibre available
Standard assemblies ex stock |
CABLE MANAGMENT
 Dado/Skirting Trunking
Dado/Skirting Trunking has been designed specifically for the demands of the ever-changing commercial environment. Equally suited for the transportation of power, data and communications or all three. The system is tough yet compact and offers exceptional cable capacity. Available in seven standard cover profile configurations. |
| Part No. |
Description |
| 732 333/603 |
3 Compartment Trunking, 3mtr lengths |
| 241451 |
Moulded Internal Corner |
| 241511 |
Moulded External Corner |
| 241571 |
Joint Cover |
| 241391 |
End Cap |
| 733233/83 |
Fabricated Flat Angle |
| 742095/925 |
Fabricated Tee Piece |
| 242191 |
Single Outlet Box |
| 242201 |
Double Outlet Box |
|
 Data Trunking for Cat 6 Cabling
Designed specifically for the UK and Irish markets. Its unique, registered design takes corners with ease, and allows for power and data sockets to be mounted in one compartment without reducing cable capacity. Measuring 180 x 65mm overall the trunking is spilt between power and data compartments with separate and easy access to both services. This unique design allows compliance with TIA/EIA, ISO/IC, CEN/ELEC and BS EN requirements for Category 5e and Category 6 cables. British Telecom Approved Single Vertical Modular Growth Light Weight Easily Transportable Wall Mounting of Free Standing |
| Part No. |
Pack Qty |
Description |
| 733349 |
12m |
Base, 3mtr length |
| 733489 |
12m |
Cover Set |
| 766004 |
1 |
Variable Internal Corner Set |
| 766014 |
1 |
Variable External Corner Set |
| 733369 |
5 |
Joint Cover |
| 733379 |
5 |
End Cap |
| 766034 |
1 |
Lid Spacer |
| 766583 |
1 |
Flat Angle Up |
| 766593 |
1 |
Flat Angle Down |
| 766603 |
1 |
Flat T Piece Up |
| 766613 |
1 |
Flat T Piece Down |
| 766623 |
1 |
RCD Housing Assembly |
| 766743 |
24m |
Steel Separator Strip |
| 242191 |
20 |
Single Socket Box 25mm |
| 241671 |
20 |
Single Socket Box 35mm |
| 242201 |
10 |
Double Socket Box 25mm |
| 241681 |
10 |
Double Socket Box 35mm |
| 245169 |
5 |
Triple Socket Box 25mm |
| 245179 |
5 |
Double Socket Box 35mm |
| 766713 |
50 |
Cable Retainer Clip |
| 726854 |
100 |
Earthing Clip for Steel Separator |
| 727409 |
10 |
Earthing Lead Spade Terminal |
|
Mini Trunking
PVC Mini Trunking in 3 metre lengths Self adhesive and standard non-adhesive boxes |
| Part No. |
Description |
| 16x16 |
3metre length 16x16mm STANDARD |
| 16x16SA |
3metre length 16x16mm SELF ADHESIVE |
| 25x16 |
3metre length 25x16mm STANDARD |
| 25x16SA |
3metre length 25x16mm SELF ADHESIVE |
| 40x25 |
3metre length 40x25mm STANDARD |
| 40x25SA |
3metre length 40x25mm SELF ADHESIVE |
| 280-7031 |
32mm dept. Single Box |
| 280-7100 |
32mm dept. Double Box |
|
 |
Maxi Trunking
PVC Maxi Trunking in 3 metre lengths |
 |
| Part No. |
Description |
| 50x25 |
3metre length 50x25mm STANDARD |
| 50x50 |
3metre length 50x50mm STANDARD |
| 100x100 |
3metre length 100x100mm STANDARD |
|
Cavity Floor Boxes
The new "Low Cost" floor outlet box has been designed to meet the ever increasing need for a more economic solution to floor cable management, whilst retaining the ability to accommodate the general fitting requirements. The complete assembly comprises of Reversible Hinged Tray, Carpet Surround Trim. Outlet Sub-Frame (including one 2 gang socket outlet) and divided Base Box assembly. |
 |
| Part No. |
Description |
| BCB-3FB-6-SF |
3 Compartment "Low Cost" cavity Floor Service Outlet Box with reversible hinged lid (6mm recess). Sub-frame and Base Box assembly including 1 No 13 Amp twin socket outlet. Standard Carpet Edge Trim, grey polyester. |
| BP3-4 |
Outlet Mounting Plate punched to accept four RJ45 & LJ6 outlets (36.6x22.4mm cut-out) |
| BP7 |
2 gang converter kit |
| 10310 |
Plastic cut-out blank plate |
| GCT/1-M |
Mini Floor Service Box with Hinged Tray Lid, Carpet Edge Trim and Support Sub-Frame with a fully grommetted 110mm dia. cut-out to facilitate a cable loom or an office cleaners socket. |
Carpet Edge Trims also available in a selection of materials, moulded plastic, coated steel, brushed stainless steel or brass. |
CABLE PROTECTION
Vinyl Cable Protectors TESTED TO BS6458
The low profile and gently sloping sides of our range of cable covers allows pedestrians and wheeled traffic to pass unimpeded by ensuring that required tooling in handy carry case hazardous trading or loose calbes are kept in a safe and secure condition. |
 |
| Part No. |
Description |
| Os Combi |
9 Metre Roll, Black (2 No 16 x 10mm Hole) |
| Os Double |
9 Metre Roll, Black (2 No 11mm Hole) |
| Os Large |
9 Metre Roll, Black (1 No 14mm Hole) |
| Os Multi |
9 Metre Roll, Black (1 No 30 x 10mm Hole) |
| Os Phone |
9 Metre Roll, Black (1 No 16 x 10mm Hole) |
| Os Hazard |
9 Metre Roll, Black/ Yellow (1 No 30 x10 mm Hole) |
| Os Speedi |
9 Metre Roll, Black (1 No 11mm Hole) |
| SC18-75 |
PVC Floor Saddle |
|
 Data Deck & Data Duct Cable Basket for Category 6
With the stringent installation requirements for Category 6 cabling it has been essential to find a form of cable tray that is smooth based. Standard cable basket formed from welded wire rods at regular intervals can lead to signal deteoriation. The Data Deck smooth based cable basket overcomes these problems providing the perfect surface for laying Category 6 cables. The Data Duct provides the additional benefit of protecting the sides also. Data Deck products are tailored to installation requirements.
 CableMat Cable protection & containment
CableMat is used for the installation of Category 6 cables where it is being placed in raised floor void directly onto an uneven floor surface where these cables are at risk of damages by flooding or the roughness of the floor. Chemicals within the concrete can also have an effect on the cables. CableMat is available in a variety of colours to indicate cable routes. The CableMat os also available in a raised solution made to whatever height or width required within reason. Bridges, ramps & flyovers can also be added
CommsDuct: Protecting your Fibre Cabling
CommsDuct is a flexible duct system for fibre optic cable specifically produced and designed for the European and US markets. It is fully enclosed protecting the fibre from dirt and dust, the duct is strong enough to protect cables against the most rigorous of conditions. Manufactured from a Halogen free, flame-retardant UL94/V0 plastic it is designed to meet material specifications throughout Europe. CommsDuct is easy to assemble. The only tools required are a drill, screwdriver and a saw to cut the duct to length. It is designed for speed of installation and minimum labour for the installer. The easy access cover allows fibre optic cables to be installed or removed at any time without the need to disconnect the whole system. |
 Cable Support Systems
J-Hook wide base supports make up the first and only fastener system designed for high performance, CAT 5e, Cat6 & Fibre Optic Cables. UL approved and meeting the EIA/TIA requirements, the series has expanded into a comprehensive range of solutions that eliminated the kinking, bending and crimping problems sometimes encountered with conventional fixing methods. |
| Dia. |
|
| CAT 12 |
19 |
| CAT 21 |
33 |
| CAT 32 |
50 |
| CAT 64 |
100 |
| CAT 425 |
100/150 |
|
|
| Base Components |
| CAT 12 (19mm dia) |
| CAT 21 (33mm dia) |
| CAT 32 (50mm dia) |
| CAT 64 (100mm dia) |
| CAT 425 (100/150 dia) |
|
|
| Base Accessories |
| CAT TS |
| CAT AB |
| BC 200 |
|
 |
Pre-Assembled Fixings
(SM Range) |
| CAT 1224 SM (3-8mm Flange) |
| CAT 1258 SM (8-14mm Flange) |
| CAT 12912 SM (14-20mm Flange) |
Available in Size 21, 32, 64 & 425 |
 |
Pre-Assembled Fixing
(EBC Range) |
| CAT 12 EBC (<16mm Flange) |
| CAT 21 EBC (<16mm Flange) |
| CAT 32 EBC (<16mm Flange) |
| CAT 425 EBC (<16mm Flange) |
|
 |
Pre-Assembled Fixings
(VF Range) |
| CAT 12 VF14 (1, 5-6mm Flange) |
| CAT 121 VF14 (1, 5-6mm Flange) |
| CAT 132 VF14 (1, 5-6mm Flange) |
| CAT 425 VF14 (1, 5-6mm Flange) |
|
 |
Pre-Assembled Fixing
(CD1B Range) |
| CAT 12 CD1B (20mm Diameter) |
| CAT 21 CD1B (20mm Diameter) |
| CAT 32 CD1B (20mm Diameter) |
|
 |
Pre-Assembled Fixing
(AB Range) |
| CAT 12 AB |
| CAT 21 AB |
| CAT 32 AB |
|
 |
Pre-Assembled Fixing
(4Z34 Range) |
| CAT 12 4Z34 (M6 M8) |
| CAT 12 6Z34 (M8 M12) |
Available in Size 21 & 32 |
 |
Pre-Assembled Fixing
(TS Range) |
| CAT 12 TS |
|
 |
Pre-Assembled Fixing
(BC200 Range) |
| CAT 12 BC200 (<16mm Flange) |
| CAT 21 BC200 (<16mm Flange) |
| CAT 32 BC200 (<16mm Flange) |
|
 |
INSTALLATION ACCESSORIES
Cable Glands and Locknuts
IP68 Cable Glands and LockNuts (Polyamide 6/6)
Standard Colour RAL 7035 Light Grey |
| Part No. |
Description |
| EPN M20 |
1.5(10-14) |
| EPN RN20 (red) |
1.5(10-14) |
| EPN M20 |
1.5(6-12) |
| EPN M25 |
1.5(13-18) |
| EPN M32 |
1.5(18-25) |
| EPN M20 |
Sealing Washer |
|
 |
Cable Ties
Material Polyamide 6/6 U.V. Resistant.
Available in Black or Natural. n = Natural b = Black
Re-Usable Cable Ties also in Stock.
 |
| Part No. |
Description |
| CT10025 |
100 x 2.5mm Pk(100) |
| CT15036 |
150 x 3.6mm Pk(100) |
| CT20048 |
200 x 4.8mm Pk(100) |
| CT30048 |
300 x 4.8mm Pk(100) |
| CT36848 |
368 x 4.8mm Pk(100) |
| CT20076 |
200 x 7.6mm Pk(100) |
| CT29276 |
292 x 7.6mm Pk(100) |
| CT36876 |
368 x 7.6mm Pk(100) |
| CT53090 |
530 x 9.0mm Pk(100) |
| CT71090 |
710 x 9.0mm Pk(100) |
|
Mains Power Leads & Accessories
IEC320 Power Cord A range of IEC320, black fully
moulded, mains cords for computers and peripheral
equipment. 250 Volt, 10 Amp max. rating. |
| Part No. |
Description |
| 270-0500 |
13 Amp plug to IEC socket lead, 2m |
| 270-0020 |
IEC plug to IEC socket lead, 1.8m |
| 276-0010 |
13 AMP plug to right angled IEC socket lead, 2m |
| PX0597 |
IEC rewireable socket, 10 Amp Max |
| PX0686 |
IEC rewireable plug, 10 Amp Max |
|
 |
| Extension Leads & Plugs to IEC320 |
| Part No. |
Description |
| 19602 DN |
4 way mains extension lead with 13 Amp plug, 2m |
| 19310 P |
4 way surge protected mains lead with 13 Amp plug, 2m |
| 19311 P |
6 way surge protected mains lead with 13 Amp plug, 2m |
| Quadra |
4 way mains extension reel with 13 Amp plug, 4m |
| SP1 |
13 Amp plug to IS401/A |
|
 |
| Woodscrews and Wallplugs |
| Part No. |
Description |
| 8 x ¾ CSK |
¾ inch No.8 Countersunk Electroplated Woodscrews |
| 8 x 1 CSK |
1 inch No.8 Countersunk Electroplated Woodscrews |
| 8 x 1½ CSK |
1 ½ inch No.8 Countersunk Electroplated Woodscrews |
| 8 x 2 CSK |
2 inch No.8 Countersunk Electroplated Woodscrews |
| 8 x ¾ SL |
¾ inch No.8 Countersunk Square-Lok Woodscrews |
| 8 x 1 SL |
1 inch No.8 Countersunk Square-Lok Woodscrews |
| 8 x 1½ SL |
1 ½ inch No.8 Countersunk Square-Lok Woodscrews |
| 8 x 2 SL |
2 inch No.8 Countersunk Square-Lok Woodscrews |
| TP1 |
5.5 x 22mm yellow wallplugs, box of 100 |
| TP2 |
5.5 x 35mm red wallplugs, box of 100 |
|
 |
| Masonary Drill Bits and Driver |
| Part No. |
Description |
| TBE5 |
5.5mm Masonary Drill Bit, Yellow |
| TBE5.5 |
5.5mm Masonary Drill Bit, Red |
| 10RED |
Square-Lok Screwdriver |
|
|
| Cable Clips |
| Part No. |
Description |
| TC 3-5W |
White round clips for 3-5mm Dia Cable |
| TC 5-7W |
White round clips for 5-7mm Dia cable |
| TC 7-10W |
White round clips for 7-10mm Dia cable |
| TC10-14W |
White round clips for 10-14mm dia cable |
|
 |
| PVC Insulating Tape, Flame retardant to BS 3924 |
| Part No. |
Description |
| IT20BK |
Black PVC tape 20mtrs x 19mm |
| IT20BL |
Blue PVC tape 20mtrs. x 19mm |
| IT20RE |
Red PVC tape 20mtrs. x 19mm |
| IT20WH |
White PVC tape 20mtrs x 19mm |
| IT20YE |
Yellow PVC tape 20mtrs x 19mm |
|
 |
LABELLING SYSTEMS
 Easy-to-use Label Printing Software
The software is pre-loaded with all the label part numbers, and many standard jobs that you may wish to use. Alternatively you can create your own job from scratch, choosing the part number and layout of your choice.
Features
Runs under all recent versions of Windows
Handles both basic & complex sequences with great ease
Many layout options for each label
Import from spreadsheets and word processors
Unlimited technical support and advice by telephone or email
Comes with a multi-user licence (please ask us for further details)
Free upgrades for all registered users so that you are always up-to-date |
| Part No. |
Description |
| SLS |
Labeling Software CD |
| SLL10L |
White labels for Cable, 21 Sheet per pack |
| SLL10LP |
Purple labels for Cable, 21 Sheet per pack |
| SLL44 |
White labels for Cable, 10 Sheet per pack |
| PL15 |
White non-adhesive labels for Modules/Plates, 20 Sheets per Pack |
| PL25 |
White non-adhesive labels for Patch Panels, 20 Sheets per Pack |
| PL17 |
White non-adhesive labels for Patch Panels, 20 Sheets per Pack |
| PL19 |
White non-adhesive labels for Patch Panels, 20 Sheets per Pack |
|
|
 KL60 Portable Label Printer
Four-digit/one-line display. Operates on six AA batteries (not included). Includes one 9mm black on white tape cartridge. 7w x 4-3/8d x 2-1/16h.
Features
Wide, easy-to-use typewriter keyboard
LCD display
Thermal printer
Compact, portable printer
Double-line printing on three tape sizes up to 12mm wide
Built-in font with six character sizes and 41 characters/symbols |
| Part No. |
Description |
| KL-60 |
Label Printer |
| IE9WE |
9mm Tape Black lettering on White |
|
|
 Wire Marker Cassette
This cassette is designed to dispense self-adhesive vinyl impregnated wire markers in a convenient way. A standard cassette contains one roll each 0 to 9 of tape measuring 5mm wide x 2.4 metres long. Refills of each of the numbers are available. |
| Part No. |
Description |
| PLIOD |
Label Dispenser with Numbers 0 to 9. |
| PLIO0 |
Roll of 0's |
| PLIO1 |
Roll of 1's |
| PLIO2 |
Roll of 2's |
| PLIO3 |
Roll of 3's |
| PLIO4 |
Roll of 4's |
| PLIO5 |
Roll of 5's |
| PLIO6 |
Roll of 6's |
| PLIO7 |
Roll of 7's |
| PLIO8 |
Roll of 8's |
| PLIO9 |
Roll of 9's |
|
|
|
|
